rev. 1.0 march 2018 www.aosmd.com page 1 of 7 AOZ8211ADI-02 single channel unidirectional tvs general description the AOZ8211ADI-02 is a one-line transient voltage sup- pressor diode designed to protect voltage sensitive elec- tronics from high transient conditions and esd. this device incorporates one tvs diode in an ultra-small dfn 1.0 mm x 0.6 mm package. during transient conditions, the one-line tvs diode directs the transient to ground. it may be used to meet the esd immunity requirements of iec 61000-4-2, level 4 (15 kv air, 8 kv contact discharge). the AOZ8211ADI-02 comes in an rohs compliant pack- age and is rated over a -40 c to +85 c ambient tem- perature range. the ultra-small 1.0 mm x 0.6 mm x 0.5 mm dfn package makes the AOZ8211ADI-02 ideal for applications where pcb space is at a premium. the small size and high esd protection makes the AOZ8211ADI-02 ideal for pro- tecting voltage sensvoltage sensitive electronics from high transient conditions and esd. features ? esd protection for high-speed data lines: C iec 61000-4-2 (esd) 30 kv (air), 30 kv (contact) C human body model (hbm) 30 kv ? low insertion loss ? low clamping voltage ? low operating voltage: 2.5 v applications ? portable handheld devices ? keypads, data lines, buttons ? notebook computers ? digital cameras ? portable gps ? mp3 players typical application pin configuration signal line unidirection protection of single line cathode 2 1 anode downloaded from: http:///
AOZ8211ADI-02 rev. 1.0 march 2018 www.aosmd.com page 2 of 7 ordering information aos green products use reduced levels of halogens, and are also rohs compliant.please visit www.aosmd.com/media/aosgreenpolicy.pdf for additional information. absolute maximum ratings exceeding the absolute maximum ratings may damage the device. notes: 1. iec 61000-4-2 discharge with c discharge = 150pf, r discharge = 330 ? . 2. human body discharge per mil-std-883, method 3015 c discharge = 100 pf, r discharge = 1.5 k ? . maximum operating ratings part number ambient temperature range package environmental AOZ8211ADI-02 -40 c to +85 c dfn 1.0mm x 0.6mm green product rohs compliant parameter AOZ8211ADI-02 peak pulse current, t p = 8/20 s 6 a peak pulse power, t p = 8/20 s 50 w storage temperature (t s ) -65 c to +150 c esd rating per iec61000-4-2, contact (1) 30 kv esd rating per iec61000-4-2, air (1) 30 kv esd rating per human body model (2) 30 kv parameter rating junction temperature (t j ) -40 c to +85 c downloaded from: http:///
rev. 1.0 march 2018 www.aosmd.com page 3 of 7 AOZ8211ADI-02 electrical characteristicst a = 25 c unless otherwise specified. electrical characteristicst a = 25 c unless otherwise noted, v f = 0.9 v max. @ i f = 10 ma for all types . symbol parameter diagram i pp maximum reverse peak pulse current v cl clamping voltage @ i tlp v rwm working peak reverse voltage i r maximum reverse leakage current v br breakdown voltage @ i t i f forward current v f forward voltage p pk peak power dissipation c j capacitance @ v r = 0 and f = 1 mhz device device marking v rwm (v) max. i r ( a) max. v br (v) min. i t v f (v) typ. v cl max. c j (pf) typ. i tlp = 1 a i tlp = 5 a i tlp = 12 a AOZ8211ADI-02 k 2.5 0.1 2.8 2 a 0.75 5.00 7.00 9.50 11 i i f i r i t i tlp v f v cl v br v rwm v downloaded from: http:///
AOZ8211ADI-02 rev. 1.0 march 2018 www.aosmd.com page 4 of 7 typical performance characteristics i/o ? gnd insertion loss vs. frequency 50 -5 -10-15 -20 -25 -30 -35 -40 -45 frequency (mhz) insertion loss (db) 1 10 100 1000 10000 capacitance vs. reverse bias reverse bias (volts) normalized capacitance 1.21.0 0.8 0.6 0.4 0.2 0 012345 transmission line pulse (tperiod = 100 ns, tr = 1 ns) 4035 30 25 20 15 10 50 10 98 7 6 5 4 3 2 1 0 peak pulse current, i tlp (a) clamping voltage, v cl (v) forward voltage vs. forward current (tperiod = 100 ns, tr = 1 ns) forward current (a) forward voltage (v) 02468 12 10 0 2 4 6 8 12 10 downloaded from: http:///
AOZ8211ADI-02 rev. 1.0 march 2018 www.aosmd.com page 5 of 7 package dimensions, dfn 1.0 x 0.6, 2l 1.00 unit: mm a seating plane notes:1. all dimensions are in milliteters. angles are in degrees. 2. coplanarity applies to the exposed heat sink slug as well as the terminals. symbols a a1 b d e el l1 r aaabbb ccc min. 0.470.00 0.45 0.95 0.55 --- 0.200.05 dimensions in millimeters recommended land pattern side view bottom view nom. 0.500.03 0.50 1.00 0.60 0.40 0.25 0.050.03 ref. 0.100.15 0.05 0.05 max. 0.530.05 0.55 1.05 0.65 --- 0.300.15 dimensions in inches c ccc 2x c pin# id b(2x) 0.30 0.55 0.40 0.30 0.10 x 45 symbols a a1 b d e el l1 r aaabbb ccc min. 0.0190.000 0.018 0.037 0.022 --- 0.0080.002 nom. 0.0200.001 0.020 0.039 0.024 0.016 0.010 0.0020.001 ref. 0.0040.006 0.002 0.002 max. 0.0210.002 0.022 0.041 0.026 --- 0.0120.006 l1 bbb cab 0.08 c c aaa 2x c aaa 2x b d al(2x) e e/2 e r downloaded from: http:///
rev. 1.0 march 2018 www.aosmd.com page 6 of 7 AOZ8211ADI-02 tape and reel dimensions, dfn 1.0 x 0.6, 2l carrier tapereel leader / trailer & orientation tape size 8mm reel size ?178 m ?178 0.5 n ?55 1 tvsunit per reel: 10000pcs unit: mm w 8.4 +1.5/-0 h ?13.0 0.5 w1 max. 14.4 k max. 10.1 s 2.0 0.5 g n/a r n/a v n/a r g v w1 m w n h s k package dfn 1.0x0.6/ dfn 1.0x0.6a (8 mm) option t 0.23 0.02 p2 2.00 0.05 b0 1.19 0.05 a0 0.69 0.05 k0 0.66 0.05 d0 0.40 0.05 d1 1.50 0.10 e 8.00 +0.3/-0.1 e1 1.75 0.10 e2 3.50 0.05 p0 2.00 0.05 p1 4.00 0.10 unit: mm t b0 k0 d0 d1 p2 p0 e1 e e2 a0 p1 a dfn 1.0x0.6/ dfn 1.0x0.6a (8 mm) 0.20 0.05 2.00 0.05 1.05 0.04 0.65 0.04 0.61 0.04 0.40 0.05 1.50 0.10 8.00 +0.3/-0.1 1.75 0.10 3.50 0.05 2.00 0.10 4.00 0.10 b trailer tape 300mm min. components tape orientation in pocket leader tape 500mm min. downloaded from: http:///
rev. 1.0 march 2018 www.aosmd.com page 7 of 7 AOZ8211ADI-02 part marking product number code cathode mark date code k x aoz8211adi- 02 (dfn 2l) as used herein:1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. a critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. legal disclaimeralpha and omega semiconductor makes no representations or warranties with respect to the accuracy or completeness of the information provided herein and takes no liabilities for the consequences of use of such information or any product described herein. alpha and omega semiconductor reserves the right to make changes to such information at any time without further notice. this document does not constitute the grant of any intellectual property rights or representation of non-infringement of any third partys intellectual property rights. life support policy alpha and omega semiconductor products are not authorized for use as critical components in life support devices or systems. downloaded from: http:///
|
